TBHQ & Vitamin Dosing System Manufacturer in India | Exporter

TBHQ & Vitamin Dosing System

In the oil and gas industry, effective wastewater treatment and solids separation are critical for operational efficiency and environmental compliance. Polyacrylamide (PAM) and other polymer flocculants are essential for promoting flocculation, aiding in sludge dewatering, and enhancing oil-water separation in processes like produced water treatment and drilling fluid management. However, manual polymer preparation is time-consuming and prone to errors, leading to inconsistent results.

Request A Quote

Introduction: Accurate TBHQ and Vitamin Dosing for Edible Oil and Food Processing

TBHQ dosing systems are used for controlled antioxidant addition in edible oil and food processing applications where uniform dosing is important for product stability and quality. Vitamin dosing systems are used where a controlled quantity of vitamin solution or fortification additive needs to be introduced into the product stream.

Premix Technologies designs complete TBHQ and Vitamin Dosing Systems with dosing tank, agitator, metering pump, suction and discharge piping, valves, pressure gauge, calibration pot, injection arrangement, control panel and skid frame as per process requirement.

Why Choose Premix Technologies for TBHQ & Vitamin Dosing Systems?

Complete Skid Package: Dosing tank, agitator, metering pump, piping, valves, instruments and control panel supplied as an integrated system.
Accurate Metering: Pump selected based on required LPH, discharge pressure, turndown ratio and chemical compatibility.
Uniform Solution Preparation: Agitator and tank arrangement designed to maintain homogeneous TBHQ or vitamin solution before dosing.
Food Process Suitability: SS304 / SS316 construction can be supplied for edible oil, food processing and nutraceutical applications.
Automation Options: Manual control, VFD control, PLC-based control, 4-20 mA input, batch dosing and flow-proportional dosing options are available.

Key Applications

TBHQ antioxidant dosing for edible oil processing.
Vitamin solution dosing for fortified oil and food products.
Food additive dosing in controlled process lines.
Antioxidant and stabilizer dosing systems.
Batch preparation and controlled injection into transfer lines or tanks.
Process additive dosing for food, chemical and nutraceutical plants.

Technical Specifications

Typical technical configuration of TBHQ and Vitamin Dosing System by Premix Technologies:

System Type	Skid-mounted TBHQ / Vitamin preparation and dosing system	Suitable for edible oil, food processing and process additive applications.
Dosing / Preparation Tank	SS304 / SS316 tank, capacity as per process requirement	Includes inlet, outlet, drain, vent, top cover, level indication and inspection provision.
Agitator	Top-entry low-speed agitator with SS shaft and impeller	Maintains uniform concentration of TBHQ / vitamin solution before dosing.
Metering Pump	Electronic dosing pump / mechanically actuated diaphragm pump / plunger pump	Selected based on required dosing flow, pressure and accuracy.
Dosing Rate	Customizable as per process requirement	Flow range can be designed from low LPH dosing to higher capacity process dosing.
Material of Construction	SS304 / SS316 / PP / PVDF / PTFE wetted parts as per chemical compatibility	Material selection depends on additive, concentration, temperature and pressure.
Piping & Valves	Suction valve, discharge valve, NRV, PRV, pressure gauge, calibration pot and injection quill	Provides safe, serviceable and controllable dosing operation.
Instrumentation	Level switch, pressure gauge, flow indication / flow meter and low-level alarm options	Supports monitoring, safety and automation of dosing operation.
Control Panel	Local control panel with pump and agitator control	Optional PLC, VFD, 4-20 mA input, flow-proportional control and remote monitoring.
Skid Frame	MS epoxy painted / SS skid frame	Compact skid arrangement for easy installation and maintenance.

Additional Benefits

Consistent Product Quality: Controlled dosing helps maintain uniform additive concentration.
Reduced Manual Error: Automated or semi-automated dosing reduces dependency on manual addition.
Flexible Design: System can be customized for single pump, duty-standby pump or multi-point dosing.
Easy Calibration: Calibration pot and dosing accessories help verify actual pump output.
Safe Operation: PRV, NRV, isolation valves and level protection improve operating safety.
Documentation Support: Technical datasheet, GA drawing, QAP, test certificates and operating manual can be provided.

Premix Technologies can design and manufacture TBHQ and Vitamin Dosing Systems as per your required dosing rate, tank capacity, chemical concentration, line pressure, automation requirement and site layout.

Contact Premix Technologies at sales@premixtechnologies.com or +91 89056 16775 for a customized TBHQ and Vitamin Dosing System offer.

Customer Reviews

High Rated Feedback From Our Industrial Customers

Google Review ★★★★★

Premix Technologies supported us with a reliable dosing system and quick technical response. The equipment quality and installation support were very professional.

Water Treatment Client

Google Review ★★★★★

The agitator supplied by Premix is performing smoothly in continuous operation. Their team understood the process requirement and suggested the right configuration.

Chemical Process Customer

Google Review ★★★★★

Good product finishing, timely communication and dependable service. The dosing pump package was delivered as committed and worked well after commissioning.

Industrial Utility Project

Google Review ★★★★★

We appreciate their practical engineering approach and support after supply. Premix is a good partner for agitators, dosing pumps and chemical dosing systems.

OEM & EPC Buyer

TBHQ & Vitamin Dosing System