Agitator Impellers
Paddle, propeller, turbine, anchor, rushton turbine, gate, disperser, helical ribbon and hydrofoil impellers for industrial mixing duties.
Learn More
Clamp-On Agitator
Introduction: Clamp-On Agitator
Clamp-on agitators are designed for quick mounting on small tanks, drums and process vessels. Premix Technologies supplies clamp-on designs for applications where operators need simple installation, repositioning and dependable mixing without permanent tank modification.
Key Features
- Quick clamp-style mounting for suitable vessels
- Compact drive with practical shaft and impeller arrangement
- Useful for low-volume blending and chemical preparation
- Available with application-specific metallurgy and speed selection
Typical Applications
Clamp-on agitators are used in small chemical tanks, dosing solution preparation, laboratory batches, pilot batches and production support vessels.
Technical Configuration
| Parameter | Available Options |
| Mounting | Application-specific tank or vessel mounting arrangement |
| MOC | MS, SS304, SS316, PP, PVDF, rubber lined, FRP lined or special metallurgy |
| Drive | Motor, gearbox, VFD and speed selection based on process duty |
| Impeller | Selected as per viscosity, flow pattern, tank geometry and mixing objective |
CFD Assisted Agitator Engineering Review
Computational Fluid Dynamics (CFD) is used as an engineering support method to understand liquid circulation, velocity distribution, turbulence, vortex tendency and possible dead zones before finalizing agitator configuration. This helps our team match impeller type, RPM, shaft position, baffle arrangement and motor power with the actual process requirement.
For industrial agitators, CFD review is useful for blending, solid suspension, heat transfer, gas dispersion, slurry handling, fermentation and high-viscosity mixing duties. It gives customers a clearer view of how the mixer will perform inside the vessel, especially where tank geometry, viscosity, solids loading or batch quality is critical.
Engineering Points We Review
- Flow pattern, circulation path and tank turnover
- Dead zones near the wall, bottom dish and process nozzles
- Impeller tip speed, shear level and velocity profile
- Baffle requirement to reduce vortex and improve mixing
- Power draw, torque and gearbox loading for reliable operation
- Scale-up behavior from pilot trials to production vessels
Customer Benefits
- Better agitator selection for the real process duty
- Improved mixing uniformity and batch consistency
- Reduced risk of sedimentation, floating layers and unmixed pockets
- More confidence in motor, shaft, impeller and seal selection
- Useful technical support for new tanks and retrofit applications
CFD flow visualization used for agitator selection, impeller performance review and mixing improvement.
Product FAQs
Frequently Asked Questions About Clamp-On Agitator in India
Technical answers about selection, operation, materials, controls and application requirements.
Clamp-On Agitator in India is a mixing solution designed to create the required circulation, suspension, dispersion, blending or heat-transfer performance for its intended process.
It is used in process tanks or vessels where the product, tank geometry and mixing objective match the equipment duty.
Impeller selection depends on viscosity, density, solids, gas rate, shear sensitivity, tank geometry and the required flow pattern.
RPM, impeller diameter, power and torque are selected together using process properties, tank dimensions and the required mixing intensity.
Yes, when the complete operating range is included in the design basis and the motor, gearbox, shaft and impeller are checked at the worst condition.
Carbon steel, SS304, SS316, SS316L, duplex, coated steel and selected non-metallic constructions may be used depending on corrosion, abrasion and hygiene requirements.
Baffles, sealing and mounting depend on tank geometry, vortex risk, pressure, vacuum, chemical hazard and maintenance requirements.
Provide tank diameter and height, operating volume, density, viscosity, temperature, pressure, solids, process objective, material and seal requirements.
Premix Technologies designs Clamp-On Agitator in India from actual tank geometry, fluid properties, process duty and mechanical-design requirements.