Agitator Impellers
Paddle, propeller, turbine, anchor, rushton turbine, gate, disperser, helical ribbon and hydrofoil impellers for industrial mixing duties.
Learn More
Introduction: Flash Mixer
Flash mixers are used where chemicals must be dispersed quickly and evenly into a flowing or batch process. Premix Technologies designs flash mixers for water treatment, wastewater treatment, chemical dosing and neutralization applications where rapid contact improves process performance.
Key Features
- High-intensity mixing for fast chemical dispersion
- Suitable for coagulants, alkali, acid, chlorine and treatment chemicals
- Custom tank, shaft, impeller and motor selection
- Designed for reliable operation in continuous treatment processes
Typical Applications
Flash mixers are used in ETP, STP, WTP, coagulation systems, pH correction systems, chemical dosing tanks and rapid blending stages.
Technical Configuration
| Parameter | Available Options |
| Mounting | Application-specific tank or vessel mounting arrangement |
| MOC | MS, SS304, SS316, PP, PVDF, rubber lined, FRP lined or special metallurgy |
| Drive | Motor, gearbox, VFD and speed selection based on process duty |
| Impeller | Selected as per viscosity, flow pattern, tank geometry and mixing objective |
Product FAQs
Frequently Asked Questions About Flash Mixer in India
Technical answers about selection, operation, materials, controls and application requirements.
Flash Mixer in India is a mixing solution designed to create the required circulation, suspension, dispersion, blending or heat-transfer performance for its intended process.
It is used in process tanks or vessels where the product, tank geometry and mixing objective match the equipment duty.
Impeller selection depends on viscosity, density, solids, gas rate, shear sensitivity, tank geometry and the required flow pattern.
RPM, impeller diameter, power and torque are selected together using process properties, tank dimensions and the required mixing intensity.
Yes, when the complete operating range is included in the design basis and the motor, gearbox, shaft and impeller are checked at the worst condition.
Carbon steel, SS304, SS316, SS316L, duplex, coated steel and selected non-metallic constructions may be used depending on corrosion, abrasion and hygiene requirements.
Baffles, sealing and mounting depend on tank geometry, vortex risk, pressure, vacuum, chemical hazard and maintenance requirements.
Provide tank diameter and height, operating volume, density, viscosity, temperature, pressure, solids, process objective, material and seal requirements.
Premix Technologies designs Flash Mixer in India from actual tank geometry, fluid properties, process duty and mechanical-design requirements.