Mixing impellers are selected according to the required flow pattern, viscosity, shear level and tank geometry. Premix Technologies manufactures standard and customized impellers for blending, dispersion, suspension and process mixing.
Used in agitators for chemical tanks, reactors, dosing systems, water treatment, slurry tanks, food process vessels and specialty mixing applications.
| Parameter | Available Options |
| Types | Paddle, propeller, turbine, hydrofoil, anchor, gate and custom |
| Flow Pattern | Axial, radial, tangential or mixed flow |
| MOC | MS, SS304, SS316, rubber lined, FRP lined or special alloy |
| Selection Basis | Viscosity, tank size, process objective and mixing intensity |
Computational Fluid Dynamics (CFD) is used as an engineering support method to understand liquid circulation, velocity distribution, turbulence, vortex tendency and possible dead zones before finalizing agitator configuration. This helps our team match impeller type, RPM, shaft position, baffle arrangement and motor power with the actual process requirement.
For industrial agitators, CFD review is useful for blending, solid suspension, heat transfer, gas dispersion, slurry handling, fermentation and high-viscosity mixing duties. It gives customers a clearer view of how the mixer will perform inside the vessel, especially where tank geometry, viscosity, solids loading or batch quality is critical.
CFD flow visualization used for agitator selection, impeller performance review and mixing improvement.
Technical answers about selection, operation, materials, controls and application requirements.
Mixing Impellers in India is a mixing solution designed to create the required circulation, suspension, dispersion, blending or heat-transfer performance for its intended process.
It is used in process tanks or vessels where the product, tank geometry and mixing objective match the equipment duty.
Impeller selection depends on viscosity, density, solids, gas rate, shear sensitivity, tank geometry and the required flow pattern.
RPM, impeller diameter, power and torque are selected together using process properties, tank dimensions and the required mixing intensity.
Yes, when the complete operating range is included in the design basis and the motor, gearbox, shaft and impeller are checked at the worst condition.
Carbon steel, SS304, SS316, SS316L, duplex, coated steel and selected non-metallic constructions may be used depending on corrosion, abrasion and hygiene requirements.
Baffles, sealing and mounting depend on tank geometry, vortex risk, pressure, vacuum, chemical hazard and maintenance requirements.
Provide tank diameter and height, operating volume, density, viscosity, temperature, pressure, solids, process objective, material and seal requirements.
Premix Technologies designs Mixing Impellers in India from actual tank geometry, fluid properties, process duty and mechanical-design requirements.
